10pcs 4-Pin RGB 5050 LED Strip Connectors - 17cm/6.7in LED Tape Jumper Cable for 10mm Wide RGB 5050 LED Strips to Controller or Strip - Perfect for Home Lighting, DIY Projects, and Decoration
$5.61
$7.49
Safe 25%
10pcs 4-Pin RGB 5050 LED Strip Connectors - 17cm/6.7in LED Tape Jumper Cable for 10mm Wide RGB 5050 LED Strips to Controller or Strip - Perfect for Home Lighting, DIY Projects, and Decoration
$5.61
$7.49
25% Off
Delivery & Return: Free shipping on all orders over $50
Estimated Delivery: 10-15 days international
24 people viewing this product right now!
SKU: 19726214
Guranteed safe checkout
Description
Connect your SMD 5050 RGB LED strip light to another LED strip, LED dimmer or LED controller. No need to solder.Installation Instructions: 1. Ensure your LED strip is 10mm wide and has 4 copper contacts at the cutting line. 2. Carefully cut your LED strip along the cutting line. Do not tear off the paper on the back of the LED strip before finishing the connection. Just insert the paper and the LED strip together into the connector. This will be easier to insert the LED strip into the connector without bending the LED strip into damage, and the connection will also be more stable. 3. Open the cap of the connector. 4. If you use a non-waterproof LED strip, please insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector; If you use a waterproof LED strip, please first remove the waterproof silicone around the cutting line, then insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector. 5. Close the cap, and check whether the connector works well. 6. Tear off the paper on the back of the LED strip to stick the LED strip, but please reserve the paper that has already been in the connector. Note: Please make sure that the positive poles of your LED strips at both ends of the connector are on the same one channel. Please make sure the arrow marks on your cable, your LED strip and your controller are on the same one channel. Solutions: If the LED strips flicker or do not light up, please follow these steps: 1. Take off the LED strip from the connector. 2. Open all caps on the connector. 3. Use a thin and hard object to simultaneously press hard on both ends of each electrical conductor in the connector, to bring the electrical conductor down to the lowest position. Make sure the electrical conductor can touch the surface of the bottom of the connector without any pressure. In this way, the 4 electrical conductors in the connector can fully touch the 4 copper contacts on the LED strip, ensuring good electrical conductivity. 4. Insert the LED strip into the connector. Package content: 10x connector cable for SMD 5050 RGB LED strip 10x male to male 4-pin plug for RGB LED strip
More
Shipping & Returns
For all orders exceeding a value of 100USD shipping is offered for free.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
Features
Compatible with These connectors are suitable for 10mm wide 4 pin SMD 5050 RGB LED strip lights. Not for 8mm wide 4 pin SMD 3528 LED strip lights.
Function Connect your SMD 5050 RGB LED strip light to another LED strip light/ LED dimmer or controller.
Easy Installation No need to solder. Just clasp your prepared LED strip section into the connector to get connected.
Flexible and Durable These connectors are flexible and durable enough for bending or twisting in ANY ANGLES without breaking.
10pcs cable and 10pcs plugs.
Reviews
*****
Verified Buyer
5
Good quality, saves lots of time and works well. No more having to shave off the thick waterproof protective covering on top of the +/- contact points with an X-Acto knife before applying power or connecting LED strips. It's so simple. Just partially peel back the nonstick paper on the bottom of the LED strip directly below the +/- contact points. Pop open the waterproof connector lid; set the LED strip on top of the metal connector pins inside; close the lid, and the pins will pierce the LED strip from underneath (below). Just make sure to line up the +/- contact points with the metal pins before closing the lid which pierces the strip. It's so quick and easy.A must have for waterproof LED strips.Job well done TronicsPros, job well done.The review above is for item:TronicsPros Waterproof 10mm 2 pin SMD 5050 5630 Single Color LED Strip Light Connector Waterproof LED Strip to Strip Connector Jumper for Waterproof 5050 Flexible LED Strip (10pcs)
